Trampoline play still needs to pay attention to safety, and the installation steps of different trampolines will be different. We also need to be familiar with its installation steps. Some of the common key points still need to be understood. The following enclosed backyard trampolines on sales editor What are the installation steps of the trampoline in the trampoline manufacturer?

1. Put the fasteners at the appropriate position on the connecting pipe and tighten the screws with tools.
2. According to the drawings, one person stands up against a pillar near the corner of the wall first, puts it in the correct position, and places the link according to the drawing, and puts the fixed foot plate on the bottom.
3. According to the requirements of the drawing, pick up another column, put the connecting pipe in it, ask the connecting pipe to touch the column pipe, and tighten the screw with a tool.
4. For safety, fix the above connectors a little. Then put the connecting tube in, and then tighten the fixing screw.
5. According to the drawing, put different link parts on different columns. You can also put the foot plate on first and tighten all the connecting fasteners.
6. Stand up the column, connect it with the connecting pipe, and tighten the screw. And so on until the entire frame is installed.
To sum up, the editor of enclosed backyard trampolines on sales tells: a brief introduction to the installation knowledge of trampolines.